Laser Cut

Equipment introduction

The equipment is mainly used for cutting and splicing glass, which can meet the cutting of any shape.

Equipment characteristics

1. Red Bessel laser cutting with CO2 segments, good edge quality, no taper section high static pressure strength;

2. Suitable for any organic/inorganic material cutting and drilling, using ultra-short pulse cold processing characteristics, edge breakage/heat affected zone control < 10um;

3. Cutting speed MAX 500mm/s, fast speed, greatly improve production capacity, no consumables, low cost;

4. The size can meet 1560mm*490mm, and the thickness can meet 3~6mm;

5.CCD accuracy ≤50um, viewing Angle 8*8mm;

6. Positioning accuracy ±2um, repetition accuracy ±1um;

7.X axis, Y axis movement speed MAX meet 1000mm/s;

8. Meet waste collection needs.

Sample display

◆ Thin glass cutting

◆ Glass drilling

1) Square hole (5mm*5mm), oval hole (12mm&5mm) hole diameter (1mm, 10mm)

2) Inclined hole (hole diameter 10mm, tilt Angle 82°)

3) Hole diameter 0.8mm, 1mm, 2mm, 5mm, 10mm